The world’s largest wireless carrier, China Mobile Ltd. (NYSE: CHL), reportedly has awarded initial contracts for the build-out of China’s first 4G wireless network. This is especially good news for Apple Inc. (NASDAQ: AAPL), which has been trying to reach an agreement with the Chinese carrier to offer the iPhone to China Mobile’s customers.
According to unnamed sources cited by Reuters, Chinese firms Huawei and ZTE each received about 25% of the contracts in the first tender offer. Ericsson (NASDAQ: ERIC), Alcatel-Lucent S.A. (NYSE: ALU) and Nokia Corp.’s (NYSE: NOK) Nokia Siemens Networks (NSN) scored about 10% each of the contracts on offer. The total value of the contracts awarded is reported to be about $3.2 billion.
China Mobile is the only one of the major Chinese wireless carriers that does not yet have a contract to sell the iPhone. Apple has been pushing the company to get its 4G network into service so that Apple can push its iPhone 5 (and maybe the cheaper so-called iPhone 5C that is rumored to be coming next month) into the Chinese market.
Top 5 Semiconductor Companies To Buy Right Now: Aeroflex Holding Corp (ARX)
Aeroflex Holding Corp. (Aeroflex Holding) is a provider of radio frequency (RF) and microwave integrated circuits, components and systems used in the design, development and maintenance of wireless communication systems. The Company’s solutions include microelectronic components and test and measurement equipment used by companies in the space, avionics and defense; commercial wireless communications, and medical and other markets. Its products include a range of RF, microwave and millimeter wave microelectronic components, integrated circuits (ICs), and analog and mixed-signal devices. It also manufactures a range of RF and microwave wireless radio and avionics test equipment and solutions particularly for the wireless, avionics and radio test markets. The Company operates in two segments: Aeroflex Microelectronics Solutions (AMS) and Aeroflex Test Solutions (ATS). In August 2010, it acquired Advanced Control Components. In September 2013, the Company announced the sale of its Aeroflex Test Equipment Services (ATES) business to Trescal Limited. In February 2014, Aeroflex Holding Corp announced the acquisition of Shenick Network Systems.
Aeroflex Microelectronic Solutions
AMS offers a range of microelectronics products and is a provider of specialty products for the space, avionics, defense, commercial wireless communications, medical and other markets. RadHard products are specifically designed to tolerate high radiation level environments, which otherwise can degrade electronic components. The Company principally operates on a fabless semiconductor manufacturing model, outsourcing virtually all front-end semiconductor fabrication activities to commercial foundries. AMS offers a range of complementary products that provide connectivity and computing functionality for applications. Its product portfolio includes RF, microwave and millimeter wave products, including discrete components, ICs, monolithic microwave IC s and multi-chip modules.
AMS designs and manu! factures application specific, analog and mixed-signal devices for use in medical, industrial and intelligent sensors. The Company’s AMS products are used in over 100 space, avionics and defense platforms, including the Wideband Global Satellite Communications satellites, the Geostationary Operational Environmental satellites, the Advanced Extremely High Frequency satellites, the Boeing 777 airliner’s databus, the F-16’s modular mission computer, the B-1 flight controls upgrade and the Terminal High Altitude Area Defense program. Its AMS products are also used in wireless communications platforms, including WCDMA and LTE cellular base station systems, as well as point-to-point broadband radio applications. In the medical area, our products are used by two of the top four manufacturers of CT scan equipment.
AMS provides HiRel standard and custom integrated circuits and circuit card assembly for the aerospace, altitude avionics, medical, x-ray cargo scanners, cr itical transportation systems, nuclear power controls, global positioning systems (GPS) receivers, networking and telecommunication markets. AMS’ HiRel products include transceivers, analog multiplexers, clock management generators, MSI logic products, battery electronics units, voltage regulators, high-speed power controllers, MIL-STD 1553 bus controllers, remote terminals, bus monitors, microcontrollers and microprocessors, RadHard Pulse Width Modulation Controllers, RadHard Resolver-to-Digital and memory modules. HiRel Microelectronics/ Semiconductors have a typical life cycle of 10-20 years.
AMS provides a set of standard and application specific RF/microwave diodes and semiconductor devices. Microwave semiconductor products offered include diodes, amplifiers, resistors, inductors, capacitors, switches, and integrated devices. RF and Microwave active components and subsystems offered include PIN diode-based microwave control components, variable attenuators , phase shifters, limiters, time delay units and Multi-Funct! ion Micro! wave assemblies. AMS offers resistor products, which include a variety of low and high reliability power surface mounted passive devices for the wireless infrastructure and defense markets with applications in isolators, circulators, single and multi-carrier power amplifiers and circuits. Passive components offered include attenuators, terminations, adapters, DC blocks, and other components for commercial, military and laboratory applications. Other products include power amplifiers, up and down converters, mixers, filters and micro-receivers operating to over 40 giga hertz (GHz). RF and Microwave components have a typical life cycle of 5-15 years. The Company’s motion control products provide complete and integrated motion control solutions for space (both military and commercial), military, avionics, and industrial customers. Its product line offerings include actuators and mechanisms, electronic controllers, slip rings and twist capsules, DC motors and Gimbal Systems. M otion control products have a typical life cycle of 10-20 years.
Aeroflex Test Solutions
ATS is a provider of a line of specialized test and measurement hardware and software products, primarily for the space, avionics, defense, commercial wireless communications and other markets. ATS products and their applications include wireless test equipment, which is used to develop and test handsets and base stations; military radio and PMR test equipment, which is used by radio manufacturers and military, police, fire, and emergency response units to test handheld radios; avionics test equipment, which is used in the design, manufacture and maintenance of electronics systems for aircraft; synthetic test equipment, which is used to test satellites and transmit / receive modules prior to launch and deployment, and general purpose test equipment, including spectrum analyzers and signal generators.
Wireless Test Equipment is used by wireless ser vice providers and equipment manufacturers to test wireless ! handsets ! and base stations. The Company offers a range of cellular tests across a range of wireless standards and communication frequencies, including 2G and 3G, with particular capability in EDGE protocols, and the new 4G LTE/LTE(A) protocols. Products include a range of system, protocol, physical layer and parametric test solutions, such as the TM500 test mobile, RF synthesizers, digitizers and combiners, and application software. In addition, ATS provides PXI-based products which are modular scalable solutions for the handset manufacturing environment. Product applications include research and development, conformance, manufacturing/production, installation and commissioning, field service, and network optimization.
ATS Radio Test Equipment is used by radio manufacturers and military, police, fire and emergency response units to test handheld radio units. ATS provides TErrestrial Trunked Radio (TETRA), and Project 25 (P25), radio test equipment, addressing both mobil e and repeater test applications. TETRA is a global standard for private mobile radio (PMR), systems used by emergency services, public transport and utilities. P25 is a standard for digital radio communications for use by federal, state, private, and local public safety agencies in North America. Its military communications testing systems are primarily used by the United States military to test complex voice and data frequency hopping radios and accessories. Military radio and PMR test equipment has a typical life cycle of 5-20 years.
Avionics test equipment is used in the design, manufacture, test and maintenance of commercial, civil and military airborne electronic systems, or avionics. ATS equipment provides the stimulus and signals necessary for certification, verification, fault finding and diagnosis of airborne systems on the ground. For civil and commercial aviation, it has test solutions for various transponder modes, communications frequencies, emerg ency locator transmitters, weather radars and GPS systems. F! or milita! ry aviation, it has test solutions for microwave landing systems, tactical air navigation, enhanced traffic alert and collision avoidance systems, various identification friend or foe, or IFF, transponder/interrogator modes and IFF monopulse antenna simulation. ATS also provides customized avionics test solutions to support manual and automatic test equipment for manufacturing, repair and ground support operations. Avionics test equipment has a typical life cycle of 8-15 years.
Synthetic test systems test several attributes through one box and can take multiple complex measurements simultaneously. ATS provides synthetic test environment that allows digital, analog, RF/microwave and power test of circuits, modules, subsystems and complete systems for commercial, military, and aerospace customers. ATS’ STI 1000C+ and TRM 1000C products offer synthetic microwave test systems optimized for testing Transmit/Receive modules and satellite payloads in a factory setting . Its SMART^E and SMART^E 5300 products offer a modular approach for implementing multi-function configurable and reconfigurable test systems. Synthetic test solutions products have a typical life cycle of 10-15 years.
ATS offers a variety of general purpose test solutions including microwave test solutions, counters and power meters. ATS microwave test solutions cover frequency ranges from 1 megahertz (MHz) to 46 gigahertz (GHz), with various tracking, offset, continuous wave, modulated source, fault location, and group delay configuration options provided. ATS power meters are designed for field use, automated test equipment requirements and standard bench applications. General purpose test solutions have a typical life cycle of 4-7 years.
The Company Competes with Agilent Technologies, Honeywell, BAE Systems, Hittite Microwave Corporation, ILC / Data Devices Corporation, Microsemi, Anaren, Anite, Anritsu, Rohde & Schwarz, Spirent and National I nstruments.
- [By Jake L’Ecuyer]
Leading and Lagging Sectors
In trading on Tuesday, technology shares were relative leaders, up on the day by about 0.12 percent. Leading the sector was strength from Aeroflex Holding (NYSE: ARX) and Canadian Solar (NASDAQ: CSIQ). Cyclical consumer goods & services shares declined around 0.71 percent in Tuesday’s trading.
- [By Rich Smith]
The Department of Defense issued some 22 separate contract awards Thursday, totaling just under $1 billion in combined value. Not all of them went to publicly traded defense contractors, of course, but enough of them did to be worth mentioning. Here are a few of the lucky winners:
Top 5 Semiconductor Companies To Buy Right Now: Camtek Ltd (CAMT)
Camtek Ltd. (Camtek), incorporated in 1987, designs, develops, manufactures and markets automated solutions dedicated for enhancing production processes and yield for the semiconductor manufacturing and packaging and the printed circuit board (PCB) and integrated circuit (IC) substrate industries. Camtek also designs, develops, manufactures and markets automated optical inspection (AOI), systems and related products. The Company’s AOI systems are used to enhance both production processes and yields for manufacturers in the semiconductor manufacturing and packaging industry and PCB and IC Substrate industry. Through the acquisition of Printar’s assets, it also engaged in developing, manufacturing, sale and marketing of direct digital material deposition systems and inks for the PCB industry, with two major fields of activity: Solder Mask and Legend. In addition, through the acquisition of Sela, it is also engaged in the development, manufacturing and marketing of automate d scanning electron microscope (SEM) and transmission electron microscope (TEM) sample preparation equipment, primarily for the semiconductor industry.
As of December 31, 2011, the Company had sold more than 2,500 AOI systems in 34 countries worldwide. The Company’s PCB customer base includes the majority of the 100 PCB manufacturers worldwide. As of December 31, 2011, it had sold over 300 Falcon systems to more than 25 semiconductor manufacturers, among them outsourced semiconductor assembly and test (OSAT), integrated device manufacturers (IDM) and wafer level packaging subcontractors, including eight out of the top 10 semiconductors companies.
Camtek’s AOI systems consist of an electro-optical assembly unit, either movable or fixed, which consists of a video camera, precision optics and illumination sources. The electro-optical unit captures the image of the inspected product; a precise, either movable or fixed table, that holds the inspected product, and an electronic hardware unit, which operates the! entire system and includes embedded components that process and analyze the captured image by using its algorithms. Its systems can also compile and communicate statistical reports of inspection findings through the customer’s factory information system. The Company offers a range of systems for automated optical inspection of semiconductor wafers, IC substrates and PCBs. These systems are used to enhance production yields and assist in controlling manufacturing processes at wafer fabrication, test and assembly houses, and PCB plants worldwide.
The Company’s Falcon systems are designed for the back end market of the semiconductor industry. The Falcon’s advanced algorithms and inspection capabilities enable its dedicated models to detect defects in the die, which, if left undetected, may cause failure. The Condor is designed to meet the current and future inspection needs of the semiconductor industry. The Condor, through algorithms and advanced hardware configuration, is designed to enhance two dimensional (2D) and three dimensional (3D) detection abilities and increased throughput. The Condor family includes models for: 3D and 2D metrology and inspection of bumped-wafer prepared for packaging in the flip-chip technology; 2D metrology and inspection of finished wafers at the end of their manufacturing process and in test houses; Post-dicing inspection of frame-mounted wafers at assembly and packaging facilities, where it adds the value of detecting dicing-related damage, and inspection and metrology of micro-electro mechanical systems (MEMS) and other special applications.
Condor 5LED is an AOI system designed to provide solutions to a range of requirements that are to light emitting diode (LED) semiconductor manufacturers. The LED market’s special inspection requirements are characterized by 3-6 inch wafers, each of which may contain between 100 to over 200 thousand LED devices per wafer. Typically, the wafe r is made of a translucent compound semiconductor, such as g! allium ar! senide, gallium phosphide and/or indium phosphide. The Gannet system is designed for the front end market of the semiconductor industry.
The Company’s AOI products for this industry consist of five product lines: the Phoenix, Dragon and Orion for the inspection of inner and outer layers of PCB panels and ultra-fine-line IC substrate; large area masks (LAM) dedicated for inspection of artwork; and the Pegasus for final inspection (AFI) of IC substrates and high density interconnect (HDI) panels. The Phoenix product family, introduced in November 2011, is designed to support a range of the demanding PCB and IC substrate applications, while keeping in pace with the dynamic technology changes in the industry. The Phoenix product family is enhanced with Spark – Camtek’s and detection engine providing high detection capabilities, while minimizing false calls.
Dragon systems are high-throughput, automation-ready systems for inspection of all PCB types i n a mass production environment. Dragon models are optimized for specific PCB technology ranges – from mainstream circuits of typically 100 (microns) conductor line width, up to high density substrates having 12 (microns) wide conductive lines. All Dragon models are designed to interface with automated material handling mechanisms provided by the Company or other automation suppliers. Orion systems are stand-alone AOI systems for high volume inspection of all PCB types designed to operate in inspectify mode of operation. Inspectify is a mode of operation enabling the operator to perform verification immediately after inspection on the same system, thus saving time and eliminating handling-related defects.
LAM is specially designed for main-stream LAM inspection. It offers unparalleled detection ability on LAM with down to 25 (microns) line/space width technology. The LAM incorporates advanced technology innovations to ensure the level of detection that these ma sks require at this critical production stage. Camtek offers! various ! stand-alone verification systems that enable verification of panels after inspection. The Pegasus line includes systems for automated inspection of finished IC substrates that are subsequently used in packaging of ball grid array (BGA) and Chip Scale Package (CSP) devices. The Pegasus inspects both sides of the substrate, detecting process and mechanical defects, in particular in the gold-plated areas, where the substrate will interconnect with the silicon die or the PCB, and in the solder-mask areas. Pegasus models handle substrates in strip format in magazines.
GreenJet is a SM digital printing system aimed to replace the conventional SM application lines for prototypes and high mix low volume production. The GreenJet system offers manufacturers flexible and digital SM printing technology solution. The LGP system incorporates PCB digital legend printing technologies with specially developed heat curable ink, resulting in output and system performance. Camtek h as developed the inks for both LGP and GreenJet, which involves different chemicals mixed together in order to reach the required ink characterization.
The Company competes with Rudolph Technologies Inc., KLA-Tencor Corporation, Topcon Corporation, Toray Industries, Inc., Hitachi Ltd., Nidec Tosok Corporation., FEI Company, SII Nanotechnology Japan, Carl Zeiss, Inc., Orbotech Ltd., Dainippon Screen Manufacturing Company, Lloyd-Doyle Limited, Gigavis Co. Ltd., ATI Electronics Pty Ltd., Shirai Electronics Industrial Co. Ltd., First EIE SA and MicroCraft K.K.
- [By Eddie Staley]
In trading on Tuesday, technology shares were relative laggards, down on the day by about 1.68 percent. Top decliners in the sector included Camtek (NASDAQ: CAMT), down 15.54 percent, and MakeMyTrip (NASDAQ: MMYT), off 11.85 percent.
- [By Garrett Cook]
In trading on Tuesday, technology shares were relative laggards, down on the day by about 1.68 percent. Top decliners in the sector included Camtek (NASDAQ: CAMT), down 16.3 percent, and MakeMyTrip (NASDAQ: MMYT), off 11.4 percent.
- [By Bryan Murphy]
It’s fun to be right, but it’s also important to be right in a sustainable way. Otherwise, what’s the point? While it remains to be seen if yours truly was right regarding his call last week on Camtek LTD. (NASDAQ:CAMT) [it’s not looking ideal], it’s worth another look at CAMT, if only to see how much progress has been made and what needs to happen now.
- [By Garrett Cook]
Technology shares gained around 1.13 percent in Tuesday’s trading. Top gainers in the sector included iGATE (NASDAQ: IGTE), up 7.7 percent, and Camtek (NASDAQ: CAMT), up 9.8 percent.
Top 5 Semiconductor Companies To Buy Right Now: Ambarella Inc (AMBA)
Ambarella, Inc., incorporated on January 15, 2004, is a developer of semiconductor processing solutions for video that enable high-definition (HD), video capture, sharing and display. The Company combine its processor design capabilities with its video and image processing, algorithms and software to provide a technology platform. It sells solutions into the camera and infrastructure markets, with approximately 27 million system-on-a-chips (SoCs) shipped since our inception. In the camera market, its solutions enable the creation of video content for wearable sports cameras, automotive aftermarket cameras, Internet Protocol (IP), security cameras, digital still cameras (DSCs), telepresence cameras, camcorders and pocket video cameras. In the infrastructure market, its solutions manage IP video traffic, broadcast encoding and IP video delivery applications. In 2012, the Company released its Wireless Camera Developers Kit. In 2012, it also launched S2 SoC, which enables Ultr a High-Definition IP security cameras.
The Company sells its solutions to original design manufacturers (ODMs), and original equipment manufacturers (OEMs), globally. In the camera market, its video processing solutions are designed into products from OEMs, including Robert Bosch GmbH and affiliated entities, Samsung Electronics Co., Ltd. and Woodman Labs, Inc., doing business as (d/b/a) GoPro, or GoPro, who source its solutions from ODMs, including Ability Enterprise Co., Ltd., Asia Optical Co. Inc., Chicony Electronics Co., Ltd., DXG Technology Corp., Hon Hai Precision Industry Co., Ltd. and Sky Light Digital Ltd. In the infrastructure market, its solutions are designed into products from OEMs, including Harmonic Inc., Motorola Mobility, Inc. (owned by Google, Inc.) and Telefonaktiebolaget LM Ericsson, who source its solutions from ODMs, such as Plexus Corp.
The Company’s image signal processing architecture, known as Amba Clear, incorporates advanced algorithms to convert raw senso! r data to high-resolution still and high-definition video images concurrently. Image processing algorithms include sensor, lens and color correction, demosaicing, which is a process used to reconstruct a full color image from incomplete color samples, noise filtering, detail enhancement and image format conversion.
The Company’s HD video processing architecture, known as AmbaCast, incorporates advanced algorithms for motion estimation, motion-compensated temporal filtering, mode decision and rate control. It supports all three compression profilesbaseline, main and highas specified in the H.264 standard. Its solutions for the broadcast infrastructure market allow OEMs to offer both the H.264 and MPEG-2 encoding formats.
The Company test and verify its algorithms on its architectural model prior to implementing algorithms in hardware. Its advanced verification methodology validates its approach through simultaneous modeling of architecture, algorithms and the hardware itself.
The Company’s SoC designs integrate HD video processing, image processing, applications processing and system functions onto a single chip, delivering video and image quality with features, including advanced wireless connectivity. In addition, its SoCs integrate mixed signal (analog/digital) functionality and high speed interfaces required for interfacing to advanced high-speed CMOS sensors and industry standard interfaces, such as USB 2.0 and HDMI 1.4. Its A7L SoC, which it introduced in September 2011, is fabricated in edge 32 nanometer (nm) process technology and integrates AmbaClear and AmbaCast technology.
Software Development Kit for Connectivity
The Company’s video streaming technology enables the camera’s image to be previewed on a smartphone. To enable this functionality, end customers deploy its Wireless Camera D eveloper’s Kit, or the Kit, which enables the design of ca! meras tha! t combine still photography and Full HD video with wireless video streaming to smartphones. The Kit is available for its A7L SoC product family, providing full 1080p60 HD video with photography and low power consumption.
The Company competes with CSR Plc, Fujitsu Limited, HiSilicon Technologies Co., Ltd., Texas Instruments Incorporated, Canon Inc., Panasonic Corporation, Sony Corporation, Novatek Microelectronics Corp., Sunplus Technology Co. Ltd., Intel Corporation, Magnum Semiconductor, Inc, Texas Instruments Incorporated, Broadcom Corporation, NVIDIA Corporation, Qualcomm Incorporated and Samsung.
- [By MONEYMORNING.COM]
120% on Ambarella Inc. (Nasdaq: AMBA), recommended on Aug. 8 at $16.60. The stock is still up 60% from where we recommended it, and we believe it could get a nice boost from the looming IPO of extreme sports camera maker GoPro Inc.
- [By Rick Munarriz]
I’ve suggested that investors buy Ambarella (NASDAQ: AMBA ) instead of GoPro. It’s the lone provider of video compression and image processing semiconductors for GoPro’s cameras, but Ambarella isn’t hogtied to GoPro’s popularity. Ambarella’s presence in Dropcam surveillance cameras and a recent deal for Google Helpouts provide diversification in high-def cameras.
Top 5 Semiconductor Companies To Buy Right Now: Malaysian Pacific Industries Bhd (MPI)
Malaysian Pacific Industries Berhad (MPI) is an investment holding company. The principal activities of MPI, through its subsidiaries are manufacturing, assembling, testing and sale of integrated circuits, semiconductor devices, electronic components and lead frames to customers globally. The Company’s operating geographical segments include Asia, The United States of America, and Europe. The Company’s subsidiaries include Carsem (M) Sdn Bhd, Recams Sdn Bhd, Carsem Holdings Limited, Carsem Semiconductor (Suzhou) Co., Ltd, Dynacraft Industries Sdn Bhd, Carter Realty Sdn Bhd, Carter Realty Sdn Bhd and Carsem Holdings (HK) Limited. Advisors’ Opinion:
- [By Sofia Horta e Costa]
Michael Page International Plc (MPI) increased 1.1 percent to 490.2 pence after Goldman Sachs Group Inc. upgraded the stock to buy from neutral, saying the recruitment firm will benefit from a pick-up in the European economy.
Top 5 Semiconductor Companies To Buy Right Now: Analog Devices Inc (ADI)
Analog Devices, Inc. (Analog Devices), incorporated on January 18, 1965, is engaged in the design, manufacture and marketing of a range of analog, mixed-signal and digital signal processing integrated circuits (ICs). The Company produces a range of products, including data converters, amplifiers and linear products, radio frequency (RF) ICs, power management products, sensors based on micro-electro mechanical systems (MEMS) technology and other sensors, and processing products, including DSP and other processors, which are designed to meet the needs of a base of customers. The Company’s products are embedded inside many different types of electronic equipment, including industrial process control systems; instrumentation and measurement systems; wireless infrastructure equipment, and aerospace and defense electronics. The Company designs , manufactures and markets a range of ICs, which incorporate analog, mixed-signal and digital signal processing technologies. The Company ‘s product portfolio includes both general-purpose products used by a range of customers and applications, as well as application-specific products. On March 30, 2012, the Company acquired Multigig, Inc.
The Company’s product portfolio includes several thousand analog ICs. The Company’s analog IC customers include original equipment manufacturers (OEMs) and customers who build electronic subsystems for integration into larger systems. The Company is a supplier of data converter products. Data converters translate real-world analog signals into digital data and also translate digital data into analog signals. The Company is also a supplier of amplifiers. Amplifiers are used to condition analog signals. The Company provides precision, instrumentation, intermediate frequency/radio frequency (RF), broadband, and other amplifiers. The Company also offers a range of precision voltage references, which are used in a range of applications. The Company’s analog product line also includes a range port! folio of RF ICs covering the RF signal chain, from RF function blocks, such as phase locked loops, frequency synthesizers, mixers, modulators, demodulators, and power detectors, to broadband and short-range single chip transceiver solutions.
The Company’s RF ICs support the requirements of cellular infrastructure and a range of applications in the Company’s target markets. Also within the Company’s analog technology portfolio are products, which are based on MEMS technology. This technology enables the Company to build small sensors, which incorporate an electromechanical structure and the supporting analog circuitry for conditioning signals obtained from the sensing element. The Company’s MEMS product portfolio includes accelerometers used to sense acceleration, gyroscopes used to sense rotation, inertial measurement units used to sense multiple degrees of freedom combining multiple sensing types along multiple axis, and MEMS microphones used to sense audio. T he Company’s current revenue from MEMS products is derived from the automotive end market. In addition to the Company’s MEMS products, its other analog product category includes isolators. The Company’s isolators have been designed for applications, such as universal serial bus isolation in patient monitors, where it allows hospitals and physicians to adopt the advances in computer technology to supervise patient health and wirelessly transmit medical records. In smart metering applications, the Company’s isolators provide electrostatic discharge performance. In satellites, where any malfunction can be catastrophic, the Company’s isolators help protect the power system while enabling designers to achieve small form factors. Power management & reference products make up the balance of the Company’s analog sales. Those products, which include functions such as power conversion, driver monitoring, sequencing and energy management, are developed to complement analog signal chain components across core market segments from micro power, en! ergy-sens! itive battery applications to power systems in infrastructure and industrial applications.
Digital Signal Processing Products
Digital Signal Processing products (DSPs) complete the Company’s product portfolio. DSPs are optimized for numeric calculations, which are essential for instantaneous, or real-time, processing of digital data generated, from analog to digital signal conversion. The Company’s DSPs are designed to be fully programmable and to execute specialized software programs, or algorithms, associated with processing digitized real-time, real-world data. Programmable DSPs are designed to provide the flexibility to modify the device’s function using software. The Company’s DSP IC customers write their own algorithms using software development tools provided by the Company and third-party suppliers. The Company’s DSPs are designed in families of products, which share common architectures and therefore can execute the same software across a r ange of products. The Company’s customers use the Company’s products to solve a range of signal processing challenges across its core market and segment focus areas within the industrial, automotive, consumer and communications end markets. As an integrated part of the Company’s customers’ signal chain, there are other Analog Devices products connected to its processors, including converters, audio and video codecs and power management solutions.
The Company competes with Broadcom Corporation, Maxim Integrated Products, Inc., Cirrus Logic, Inc., Microchip Technology, Inc., Freescale Semiconductor, Inc., NXP Semiconductors, Infineon Technologies, ST Microelectronics, Intersil Corporation, Silicon Laboratories, Inc., Knowles Electronics, Texas Instruments, Inc. and Linear Technology Corporation.
- [By Ben Levisohn]
The market doesn’t necessarily want to go higher–it just can’t seem to help itself. Walt Disney (DIS), Analog Devices (ADI) and Idenix Pharmaceuticals (IDIX) gained.
- [By Maria Armental and Tess Stynes var popups = dojo.query(“.socialByline .popC”); ]
Analog Devices Inc.’s(ADI) fiscal second-quarter profit rose 14% as the chip maker reported higher revenue and stronger margins bolstered by secular and seasonal strength in the industrial, communications infrastructure, and automotive markets. Shares rose 1.3% to $52.65 premarket.
- [By Tyler Laundon]
Analog Devices (ADI) is one of the largest semiconductor companies in the motion-sensing space, with a market cap of $15.87 billion. STM Electronics (STM) is a slightly smaller manufacturer; its market cap is $7.6 billion.