Hot Construction Stocks To Watch Right Now

Below is the verbatim transcript of an interview aired on CNBC-TV18.

Q: The Rajiv Gandhi Equity Savings Scheme (RGESS) has got some more sops added to it, the limit has been increased and the time period for which one can put in money has been increased. Is all this good enough, how has been the performance on the ground and what would you advise people to do?

A: Rajiv Gandhi Equity Savings Scheme has come up with enhanced features into it so more steroids in it in terms of taking call from retail investors’ point of view. The limit has gone up from 10 lakh to 12 lakh and that is positive because that now covers 30 percent tax bracket people also.

If one goes by the simple mathematics then there is a potential to save Rs 7,500, which was earlier only Rs 5,000. It has spread out over three years, is also an advantage because it helps one to take benefit over three years period.

Therefore, the goodies are very much in advantage and another thing, which is a by-product to this is that finance minister and government is trying to encourage people to open demat accounts because somewhere equity cult and culture has to build in. Right now foreigners are buying more equity than Indians. 

Hot Construction Stocks To Watch Right Now: Oci NV (OCI)

Oci NV is a Netherlands-based company, which divides its activities into two groups. The first group is engaged in the design, construction and maintenance of industrial and commercial infrastructures and buildings, such as roads, ports, railroads, hospitals, stadiums and water treatment units. The second group is engaged in the production of fertilizers, such as anhydrous ammonia, granulated urea, calcium ammonium nitrate and urea ammonium nitrate, among others. The Company is a subsidiary of Orascom Construction Industries SAE, an international fertilizer producer and construction contractor based in Cairo, Egypt. In September 2013, it announced spin-off of its subsidiary OCI Partners LP. Advisors’ Opinion:

  • [By Ahmed A. Namatalla]

    OCI attracted $2 billion in commitments from a group of investors including Cascade Investment LLC, Gates’s personal investments vehicle, to help finance the move to Amsterdam, which it said would lower borrowing costs and boost its global profile. Yesterday’s settlement prompted Cairo-based investment bank Pharos Holding to raise Orascom to buy from hold, saying the construction and fertilizer company would proceed with an offer to investors to buy its Cairo-listed shares or swap them with OCI NV (OCI) stock.

Hot Construction Stocks To Watch Right Now: Stock Building Supply Holdings Inc (STCK)

Stock Building Supply Holdings, Inc., incorporated on April 16, 2009, is a diversified lumber and building materials (LBM) distributor and solutions provider that sells to new construction and repair and remodel contractors. The Company’s primary products are lumber & lumber sheet goods, millwork, doors, flooring, windows, structural components, such as engineered wood products (EWP), trusses, wall panels and other exterior products. The Company serves a customer base, including large-scale production homebuilders, custom homebuilders and repair and remodeling contractors. In addition, the Company provides solution-based services to its customers, including design, product specification and installation management services. The Company’s primary operating regions include the South and West regions of the United States.

The Company provides a balanced mix of products and services to the United States production and custom homebuilders and repair and remode l, multi-family and commercial contractors. The Company offer over 39,000 products sourced through its strategic network of suppliers, which together with its various solution-based services; represent approximately 50% of the construction cost of a new home.

Advisors’ Opinion:

  • [By Monica Gerson]

    Stock Building Supply Holdings (NASDAQ: STCK) dipped 1.53% to $19.95 in the pre-market session after the company prices 5.6 million shares at $19.50 per share by selling shareholders.

Hot Construction Stocks To Watch Right Now: Boral Ltd (BLD)

Boral Limited (Boral), is engaged in the manufacture and supply of building and construction materials in Australia, the United States and Asia. The Company’s operating segments include Construction Materials & Cement, Building Products, Boral Gypsum, and Boral USA. The Construction Materials & Cement is engaged in quarries, concrete, asphalt, transport, landfill, property, cement and concrete placing. The Building Products segment is engaged in Australian bricks, roof tiles, masonry, timber products and windows. The Boral Gypsum involves Australian and Asian plasterboard. The Boral USA is engaged in Bricks, cultured stone, roof tiles, fly ash, concrete and quarries. Advisors’ Opinion:

  • [By Eric Lam]

    Ballard Power (BLD), which designs and manufactures hydrogen fuel cells, slumped 15 percent to C$1.42, the biggest decline since March. The company yesterday said it will sell about 9 million units at $1.40 a unit for proceeds of about $12.6 million. The cash generated will be used to fund working capital, support growth and general corporate purposes, the company said.

Hot Construction Stocks To Watch Right Now: American Woodmark Corp (AMWD)

American Woodmark Corporation, incorporated on April 21, 1980, manufactures and distributes kitchen cabinets and vanities for the remodeling and new home construction markets. The Company offers framed stock cabinets in approximately 550 different cabinet lines, ranging in price from relatively inexpensive to medium-priced styles. Styles vary by design and color from natural wood finishes to low-pressure laminate surfaces. The product offering of stock cabinets includes 86 door designs in 18 colors. Stock cabinets consist of a common box with standard interior components and a maple, oak, cherry, or hickory front frame, door and/or drawer front. The Company’s product is primarily sold under the brand names of American Woodmark, Timberlake, Shenandoah Cabinetry, Potomac, and Waypoint Living Spaces.

The Company’s product is sold on a national basis across the United States to the remodeling and new home construction markets. The Company services these marke ts through three primary channels, which include home centers, builders, and independent dealers and distributors. The Company provides complete installation services to its direct builder customers through its network of nine service centers that are strategically located throughout the United States. The Company distributes its products to each market channel directly from four assembly plants through a third party logistics network. The primary raw materials used include hard maple, oak, cherry, soft maple, and hickory lumber and plywood.

Advisors’ Opinion:

  • [By John Udovich]

    After the bedroom, the kitchen is probably the place where we spend the most time awake in our homes with small cap kitchen stocks Caesarstone Sdot-Yam Ltd (NASDAQ: CSTE) and American Woodmark Corporation (NASDAQ: AMWD) along with diversified midcap Fortune Brands Home & Security Inc (NYSE: FBHS) all putting in a good performance. After all, any sort of housing recovery with more new homes being sold will help kitchen stocks and so will increased sales of older or foreclosed homes that need to have their kitchens remodeled. But which is the better kitchen stock for investors? Here is closer look at all three:

Hot Construction Stocks To Watch Right Now: CEMEX SAB de CV (CX)

CEMEX, S.A.B. de C.V. (CEMEX), incorporated on January 20, 1931, is a global cement manufacturer with operations in North America, Europe, South America, Central America, the Caribbean, Africa, the Middle East and Asia. The Company is a holding company engaged through the operating subsidiaries in the production, distribution, marketing and sale of cement, ready-mix concrete, aggregates and clinker. As of December 31, 2009, the Company’s cement production facilities were located in Mexico, the United States, Spain, the United Kingdom, Germany, Poland, Croatia, Latvia, Colombia, Costa Rica, the Dominican Republic, Panama, Nicaragua, Puerto Rico, Egypt, the Philippines and Thailand.

The Company manufactures cement through a closely controlled chemical process, which begins with the mining and crushing of limestone and clay, and, in some instances, other raw materials. The clay and limestone are then pre-homogenized, a process which consists of combining diffe rent types of clay and limestone. The mix is typically dried, then fed into a grinder, which grinds the various materials in preparation for the kiln. The raw materials are calcined, or processed, at a very high temperature in a kiln, to produce clinker. Clinker is the intermediate product used in the manufacture of cement.

Ready-mix concrete is a combination of cement, fine and coarse aggregates, admixtures (which control properties of the concrete including plasticity, pumpability, freeze-thaw resistance, strength and setting time), and water. The Company is a supplier of aggregates primarily the crushed stone, sand and gravel, used in virtually all forms of construction.

Mexican Operations

During the year ended December 31, 2009, the Mexican operations represented approximately 21% of the Company’s net sales. CEMEX Mexico is a direct subsidiary of CEMEX and is both a holding company for some of the operating companies in Mexico a nd an operating company involved in the manufacturing and ma! rketing of cement, plaster, gypsum, groundstone and other construction materials and cement by-products in Mexico. CEMEX Mexico, indirectly, is also the holding company for the international operations. The Company owns Tolteca, Monterrey, Maya, Anahuac, Campana, Gallo, and Centenario brands in Mexico. As of December 31, 2009, the Company owned 100% of CEMEX Mexico.

The Company competes with Holcim Ltd., Sociedad Cooperativa Cruz Azul, Cementos Moctezuma, Grupo Cementos Chihuahua and Lafarge Cementos in Mexico.

U.S. Operations

As of December 31, 2009, the Company’s operations in the United States represented approximately 19% of the Company’s net sales. As of December 31, 2009, the Company held 100% of CEMEX, Inc. As of December 31, 2009, CEMEX had a cement manufacturing capacity of approximately 17.9 million tons per year in the United States operations. As of December 31, 2009, the Company operated 14 cement plants located in Al abama, California, Colorado, Florida, Georgia, Kentucky, Ohio, Pennsylvania, Tennessee and Texas. As of December 31, 2009, it also had 48 rails or water served active cement distribution terminals in the United States. As of December 31, 2009, the Company had 336 ready-mix concrete plants located in the Carolinas, Florida, Georgia, Texas, New Mexico, Nevada, Arizona, California, Oregon and Washington and aggregates facilities in North Carolina, South Carolina, Arizona, California, Florida, Georgia, Kentucky, New Mexico, Nevada, Oregon, Texas, and Washington.

Spanish Operations

As of December 31, 2009, the operations in Spain represented approximately 5% of the Company’s net sales. As of December 31, 2009, the Company held approximately 99.8% of CEMEX Espana, the main operating subsidiary in Spain. The cement activities in Spain are conducted by CEMEX Espana. The ready-mix concrete activities in Spain are conducted by Hormicemex, S.A., a subsidiar y of CEMEX Espana, and the aggregates activities in Spain ar! e conduct! ed by Aricemex S.A., also a subsidiary of CEMEX Espana.

U.K. Operations

As of December 31, 2009, the Company’s operations in the United Kingdom represented approximately 8% of the Company’s net sales. As of December 31, 2009, it held 100% of CEMEX Investments Limited, the holding subsidiary in the United Kingdom. The Company is a provider of building materials in the United Kingdom with vertically integrated cement, ready-mix concrete, aggregates and asphalt operations. It is also a provider of concrete and precast materials solutions, such as concrete blocks, concrete block paving, roof tiles, flooring systems and sleepers for rail infrastructure.

The Company competes with Lafarge, Heidelberg, Tarmac, and Aggregate Industries in the United Kingdom.

German Operations

As of December 31, 2009, the operations in the Rest of Europe consisted of the operations in Germany, France, Ireland, Poland, Croatia, the Czech Republic, Latvia, Austria and Hungary, as well as the other European assets. The Company is a provider of building materials in Germany, with vertically integrated cement, ready-mix concrete, aggregates and concrete products operations (consisting mainly of prefabricated concrete ceilings and walls). It maintains a network for ready-mix concrete and aggregates in Germany. As of December 31, 2009, the Company held 100% of CEMEX Deutschland AG, the holding subsidiary in Germany.

The Company competes with Heidelberg, Dyckerhoff, Lafarge, Holcim and Schwenk in Germany.

French Operations

As of December 31, 2009, the Company held 100% of CEMEX France Gestion (S.A.S.), the holding subsidiary in France. It is a ready-mix concrete producer and aggregate producer in France. As of December 31, 2009, the Company operated 239 ready-mix concrete plants in France, one maritime cement terminal located in LeHavre, on the northern coast of Franc e, 20 land distribution centers and 42 aggregates quarries.

The Company competes with Lafarge, Holcim, Italcementi, Vicat, Lafarge, Italcementi, Colas (Bouygues) and Eurovia (Vinci) in France.

Irish Operations

As of December 31, 2009, the Company held approximately 61.2% of Readymix Plc, the operating subsidiary in the Republic of Ireland. The operations in Ireland produce and supply sand, stone and gravel, as well as ready-mix concrete, mortar and concrete blocks. As of December 31, 2009, we operated 43 ready-mix concrete plants, 27 aggregates quarries and 15 block plants located in the Republic of Ireland, Northern Ireland and the Isle of Man. The Company imports and distributes cement in the Isle of Man.

The Company competes with CRH, the Lagan Group and Kilsaran in the Republic of Ireland.

Polish Operations

As of December 31, 2009, the Company held 100% of CEMEX Polska Sp. z.o.o. (CEMEX Polska), the holding subsidiary in Poland. It is a provider of building mat erials in Poland serving the cement, ready-mix concrete and aggregates markets. As of December 31, 2009, CEMEX operated two cement plants and one grinding mill in Poland, with a total installed cement capacity of three million tons per year. As of December 31, 2009, the Company also operated 39 ready-mix concrete plants and nine aggregates quarries in Poland. As of December 31, 2009, the Company also operated 10 land distribution centers and two maritime terminals in Poland.

The Company competes with Heidelberg, Lafarge, CRH and Dyckerhoff in Poland.

Southeast European Operations

As of December 31, 2009, the Company held 100% of CEMEX Hrvatska d.d. (Hrvatska), the operating subsidiary in Croatia. As of December 31, 2009, it operated three cement plants in Croatia, with an installed capacity of 2.4 million tons per year. As of December 31, 2009, the Company also operated ten land distribution centers, three maritime cement terminals, e ight ready-mix concrete facilities and one aggregates quarry! in Croat! ia, Bosnia and Herzegovina, Slovenia, Serbia and Montenegro.

Advisors’ Opinion:

  • [By Monica Wolfe]

    Cemex SAB de CV (CX)

    As of the close of the third quarter there were nine guru owners of Cemex. These gurus held a combined weighting of 5.30%. During the third quarter, there were three gurus making buys and nine making sells of their stake in CX.

  • [By Ben Levisohn]

    Shares of Vulcan have gained 7.6%, and given a lift to other cement makers today, including Martin Marietta Materials (MLM), which has risen 4.9% and reports earnings on Thursday, Cemex (CX), which has advanced 1.5%, and Texas Industries (TXI), which is up 4.9%.

  • [By Dan Caplinger]

    Even now, though, it’s far from clear whether the recent rebound has staying power. Earlier this month, peer Vulcan Materials (NYSE: VMC  ) reported 5% lower shipments of aggregates, although rising prices helped offset the impact, and the company noted double-digit-percentage increases in shipments to hot housing areas including Arizona, California, and Florida. Similarly, Cemex (NYSE: CX  ) posted a substantial loss for its March quarter on with 5% lower revenue, but the Mexican company pointed to strength in the U.S. and Asian markets as offsetting weakness in Mexico, Europe, and Latin America.

Hot Construction Stocks To Watch Right Now: Arcadis NV (ARCAD)

Arcadis NV is a Netherlands-based international engineering and consultancy firm, providing consultancy, design, engineering and management services in infrastructure, water, environment and buildings. The Company develops, designs, implements, maintains and operates projects for companies and governments. The Company divides its business into four business lines: Infrastructure, which encompasses services for transportations, land development, energy and mining; Water, focused on water planning, wastewater and water management and consulting services; Environment, focused on activities that protect the environment and enhance sustainability, and Buildings, related to homebuilding as well as commercial and industrial buildings and facilities construction. Additionally, it works in partnership with UN-HABITAT, the United Nations agency for human settlements. Advisors’ Opinion:

  • [By Sofia Horta e Costa]

    Companies like Expedia Inc. (EXPE), which provides online travel booking services, and Arcadis NV (ARCAD), a Dutch designer of bridges and dikes, are likely to increase profit at a faster pace than larger firms during an improving economy, Duret said. Smaller companies are also less leveraged, with U.S. mid-caps holding 46 percent less debt per share than firms listed on the S&P 500, data compiled by Bloomberg show.

Hot Construction Stocks To Watch Right Now: Fortune Brands Home & Security Inc (FBHS)

Fortune Brands Home & Security, Inc., incorporated on June 9, 1988, is engaged in home and security products with companies focused on the design, manufacture and sale of products in Kitchen & Bath Cabinetry, Plumbing & Accessories, advanced material windows & entry door Systems, and security and storage products. The Company operates through four business segments: Kitchen & Bath Cabinetry, Plumbing & Accessories, Advanced Material Windows & Door Systems, and Security & Storage. The Kitchen & Bath Cabinetry segment manufactures custom, semi-custom, and stock cabinetry for the kitchen, bath, and other areas of the home. Plumbing & Accessories segment manufactures and assembles faucets, accessories, and kitchen sinks. The Advanced Material Windows & Door Systems segment manufactures and sells fiberglass and steel entry door systems. The Security & Storage segment provides locks, safety, and security devices and electronic security products. In June 2013, Fortune Brands Home & Security Inc completed the acquisition of WoodCrafters Home Products.

Kitchen & Bath Cabinetry

The Company’s Kitchen & Bath Cabinetry segment’s products includes brand names, such as Aristokraft, Omega, Kitchen Craft, Schrock, Diamond, HomeCrest, Decora, Kemper, Thomasville and Martha Stewart Living. Principally all of this segment’s sales are in North America. The Company sells directly to kitchen and bath dealers, home centers, wholesalers and builders. During the year ended December 31, 2012, sales to The Home Depot and Lowe’s consisted of approximately 32% of net sales of the Kitchen & Bath Cabinetry segment.

The Company competes with Masco and American Woodmark.

Plumbing & Accessories

The Plumbing & Accessories segment manufactures accessories and kitchen sinks in North America, China and India, predominantly under the Moen brand. The sells its Plumbing & Accessories products principally in the Un ited States and Canada. It also sells them in China, India, ! Mexico, South America and Southeast Asia. It sells directly through its own sales force and indirectly through independent manufacturers’ representatives, primarily to wholesalers, home centers, mass merchandisers and industrial distributors. During 2012, sales to The Home Depot and Lowe’s consisted of approximately 29% of net sales of the Plumbing & Accessories segment.

The Company competes with Delta, Kohler, Pfister and American Standard.

Advanced Material Windows & Door Systems

The Company’s Advanced Material Windows & Door Systems segment manufactures fiberglass and steel entry door systems, vinyl-framed window and patio doors, and urethane millwork product lines. Therma-Tru products include fiberglass and steel residential entry door and patio door systems, primarily for sale in the United States and Canada. Simonton brand of vinyl-framed windows and patio doors are mainly manufactured and sold in the United States. The segmen t’s principal customers are home centers, millwork building products and wholesale distributors, and specialty dealers that provide products to the residential new construction market, as well as to the remodeling and renovation markets. During 2012, sales to The Home Depot and Lowe’s comprised approximately 17% of net sales of the Advanced Material Windows & Door Systems segment.

The Company competes with Masonite, JELD-WEN and Plastpro, Silverline, Atrium and Milgard.

Security & Storage

The Company’s Security & Storage segment consists of locks, safety and security devices, and electronic security products manufactured, sourced and distributed by Master Lock and tool storage and garage organization products manufactured by Waterloo. The segment sells products principally in the United States Canada, Europe, Australia and Central America. Master Lock manufactures and sells key-controlled and combination padlocks, bicycle and cabl e locks, built-in locker locks, door hardware, automotive, t! railer an! d towing locks, and other specialty safety and security devices. Master Lock sells products for consumer use to hardware and other retail outlets, wholesale distributors and home centers, industrial and institutional users, original equipment manufacturers and retail outlets. During 2012, Security & Storage sales to international markets comprised approximately 20% of sales.

Waterloo manufactures tool storage and garage organization products, steel toolboxes, tool chests, workbenches and related products. Waterloo primarily sells to Sears retail stores. In addition, Waterloo sells under the Waterloo and private-label brand names to specialty industrial and automotive dealers, mass merchandisers, home centers and hardware stores.

The Company competes with Asian importers, Homak, Stanley Black & Decker, Snap-On, Kennedy, Stack-On and others in the metal storage segment and with Stanley Black & Decker, Keter, Newell Rubbermaid

Advisors’ Opinion:

  • [By Holly LaFon]

    Despite economic and political turmoil, equity markets performed well across the board in September of 2013 and over the trailing twelve months. The September gains reversed losses in August and also resulted in positive overall quarterly performance with a number of major indexes moving further into record territory. After disturbing the markets in May and June with comments that they may taper Quantitative Easing (QE), the Fed surprised investors with an announcement that it would not reduce its asset purchases in the near-term. The announcement removed fears that a continued rise in interest rates may stall the economic recovery, as seen by the market’s negative reaction to the sharp rise in the 10-year Treasury rate in August of 2013. Investors were also comforted by improving fundamentals both domestically and abroad. The Eurozone may finally be emerging from its prolonged recession and a number of economic reports in the U.S. continue to show progress. Specifically, initial unemployment claims dropped to a multiyear low early in September and the housing market continued to improve, as evidenced by prices rising 12.4 percent year-over year, which along with the stock market’s strength, has created a positive wealth effect for consumers. In response to this general economic improvement, consumer confidence increased at the end of September, and the index of leading economic indicators ticked up as well, suggesting that, absent the effects of politics, the recovery in the real economy was continuing. Our portfolios that focus on corporate restructuring (Keeley Small Cap Value, Keeley Small-Mid Cap Value, Keeley Mid Cap Value, Keeley All Cap Value, and Keeley Alternative Value) have all experienced a productive investment cycle with respect to their opportunity sets, and many of our holdings have posted impressive results in recent quarters. Although we acknowledge an improving economy has boosted the outlook for our more cyclical holdings , our research has gu

  • [By Marc Bastow]

    Home security products distributor Fortune Brands Home and Security (FBHS) raised its quarterly dividend 20% to 12 cents per share, payable on March 19 to shareholders of record as of Feb. 28.
    FBHS Dividend Yield: 1.13%

Hot Construction Stocks To Watch Right Now: Tutor Perini Corporation(TPC)

Tutor Perini Corporation, together with its subsidiaries, provides diversified general contracting, construction management, and design-build services to private clients and public agencies worldwide. It operates in three segments: Civil, Building, and Management Services. The Civil segment involves in public works construction, and the repair, replacement, and reconstruction of infrastructure. This segment?s civil contracting services include construction and rehabilitation of highways, bridges, mass transit systems, and wastewater treatment facilities. The Building segment provides services to various specialized building markets for private and public works clients, such as the hospitality and gaming, transportation, healthcare, municipal offices, sports and entertainment, education, correctional facilities, biotech, pharmaceutical, industrial and high-tech markets, electrical and mechanical, plumbing, and HVAC services. The Management Services Segment offers diversifie d construction and design-build services to the United States military and government agencies, surety companies, and multi-national corporations in the United States and internationally. This segment also provides rapid response and contract completion services; and management or general contracting services to fulfill the contractual and financial obligations of the surety on notification from the surety of a contractor bond default. The company was founded in 1894 and is headquartered in Sylmar, California.

Advisors’ Opinion:

  • [By Rich Smith]

    On Wednesday, civil engineering firm Tutor Perini Corp. (NYSE: TPC  ) said the California High-Speed Rail Authority has identified its $985 million bid to design the initial Madera-to-Fresno segment of California’s high-speed railway as the “apparent best value” of all bids received.

  • [By Rich Smith]

    Following up on the news that it’s the likely winner of a $985 million contract to design the Madera-to-Fresno segment of California’s new high-speed railway, civil engineering firm Tutor Perini  (NYSE: TPC  ) announced Tuesday that it’s scored a second major contract win.

  • [By Ben Levisohn]

    Shares of Harsco have gained 4.7% to $26.43 today at 1:16 p.m., outpacing other construction & engineering companies. Dycom (DY) has advanced 0.5% to $30, KBR Inc. (KBR) has ticked up 0.1% to $33.03, Worthington Industries (WOR) has risen 2.8% to $38.85 and Tutor Perini (TPC) has rallied 3.6% to $22.46.

Hot Construction Stocks To Watch Right Now: Ply Gem Holdings Inc (PGEM)

Ply Gem Holdings, Inc. (Ply Gem Holdings), incorporated on January 23, 2004, is a manufacturer of residential exterior building products in North America. The Company operates in two segments: Siding, Fencing, and Stone and Windows and Doors. These two segments produce a product line of vinyl siding, designer accents, cellular polyvinyl chloride (PVC) trim, vinyl fencing, vinyl and composite railing, stone veneer and vinyl windows and doors used in both new construction and home repair and remodeling in the United States and Western Canada. It also manufactures vinyl and aluminum soffit and siding accessories, aluminum trim coil, wood windows, aluminum windows, vinyl and aluminum-clad windows and steel and fiberglass doors, enabling it to bundle complementary and color-matched products and accessories with its core products. The Company’s subsidiaries includes including Ply Gem Industries, MWM Holding, AWC Holding Company, MHE, and Pacific Windows. On July 30, 2012, Ply Gem acquired substantially all of the assets of Greendeck Products, LLC.

Siding, Fencing, and Stone Segment

In the Siding, Fencing, and Stone segment, its principal products include vinyl siding and skirting, vinyl and aluminum soffit, aluminum trim coil, J-channels, wide crown molding, window and door trim, F-channels, H-molds, fascia, undersill trims, outside/inside corner posts, rain removal systems, injection molded designer accents, such as shakes, shingles, scallops, shutters, vents and mounts, vinyl fence, vinyl and composite railing, and stone veneer. It sells its siding and accessories under its Variform, Napco, Mastic Home Exteriors, and Cellwood brand names and under the Georgia-Pacific brand name through a private label program. It also sells its Providence line of vinyl siding and accessories to Lowe’s under its Durabuilt private label brand name. Its vinyl and vinyl-composite fencing and railing products are sold under its Kroy and K roy Express brand names. Ply Gem Holdings stone veneer produ! cts are sold under its United Stone Veneer brand name.

The Company sells the siding and accessories to specialty distributors (one-step distribution) and to wholesale distributors (two-step distribution). Its specialty distributors sell directly to remodeling contractors and builders. Its wholesale distributors sell to retail home centers and lumberyards who, in turn, sell to remodeling contractors, builders and consumers. In the specialty channel, it has developed a network of approximately 800 independent distributors, serving over 22,000 contractors and builders nationwide.

Windows and Doors Segment

In the Windows and Doors segment, its principal products include vinyl, aluminum, wood and clad-wood windows and patio doors, and steel, wood, and fiberglass entry doors that serve both the new home construction and the repair and remodeling sectors in the United States and Western Canada. Its products in its Windows and Doors segment are sold under the Ply Gem Windows, Great Lakes Mastic by Ply Gem, and Ply Gem Canada brands.

The Company competes with Alsco, Gentek, U.S. Fence, Homeland, Westech, Bufftech, Royal, Azek., Eldorado Stone, Coronado Stone, Jeld-Wen, Simonton, Pella and Andersen, MI Home Products, Atrium, Weathershield, Milgard, Jeld-Wen, Gienow, All Weather and Loewen.

Advisors’ Opinion:

  • [By Lisa Levin]

    Ply Gem Holdings (NYSE: PGEM) shares reached a new 52-week low of $11.48 after the company reported wider-than-expected Q4 loss and issued a weak Q1 revenue forecast.

  • [By Matt Jarzemsky]

    Installed Building Products’ debut follows mixed performance from shares of some newly public building-products companies. Through Tuesday, siding manufacturer Ply Gem Holdings Inc.(PGEM)’s shares were down 39% from the offer price in its $381 May debut. Wood-products maker Boise Cascade Co.(BCC) was up 46% from its $284 million February IPO.

  • [By Traders Reserve]

    There hasn’t been a January effect rally in shares of Ply Gem (PGEM). In fact, it has been quite the opposite. Shares are down a whopping 25% during the month. For a stock I rated as on of the Top 10 Sizzling Stocks, such a move is painful, but not disastrous. Sizzling Stocks are meant to be held for the duration of the year and we have 11 months to go. Small-cap stocks like Ply Gem can move sharply one direction or the other.

Hot Construction Stocks To Watch Right Now: Amcol International Corp (ACO)

AMCOL International Corporation (AMCOL), incorporated on December 3, 1959, is focused on the development and application of minerals and technology products and services to various industrial and consumer markets. It operates in five segments: performance materials, construction technologies, energy services, transportation and corporate. Its performance materials segment previously referred to as its minerals and materials segment is a supplier of bentonite related products. Its construction technologies segment previously referred to as its environmental segment provides products for non-residential construction, environmental and infrastructure projects worldwide. Its energy services segment previously referred to as its oilfield services segment offers a range of patented technologies, products and services for both upstream and downstream oil and gas production. Its transportation segment serves domestic subsidiaries, as well as third parties, is a dry van and flatbed carrier and freight brokerage service provider.

Performance Materials Segment

The Company supplies chromite and leonardite, and operates more than 25 mining or production facilities worldwide. It mines chromite, an iron chromium oxide, from open cast mines in South Africa and transport it to our nearby processing facility. Its primary uses include metalcasting, drilling fluid additive, and agricultural applications. Its performance materials segment conducts its business through wholly owned subsidiaries and investments in affiliates and joint ventures throughout the world. It consists of four product lines: metalcasting; specialty materials; basic minerals, and pet products. Its principal products are marketed under various registered trade names, including VOLCLAY, PANTHER CREEK, PREMIUM GEL, ADDITROL, ENERSOL, and Hevi-Sand.

The Company’s metalcasting products include blended mineral binders containing sodium and calcium bentonite and organic additives sold under the trade name ADDITROL. I! n the ferrous casting market, the Company specializes in blending bentonite of various grades by themselves or with mineral binders containing sodium bentonite, calcium bentonite, seacoal and other ingredients. It also has a line of formulated additives that introduce silicon and carbon in the melt phase of the casting process. In the steel alloy casting market, it sells a chromite product with a particle size distribution specific to a customer’s needs.

The Company’s specialty materials products contain bentonite and synthetic additives offering solutions for consumer and industrial applications. It also offers products for bio-agricultural applications. The markets and applications of its specialty materials products include fabric care, personal care, basic materials and pet products. It supply high-grade, agglomerated bentonite and other mineral additives used in fabric care products. It manufactures adsorbent polymers and purified grades of bentonite fo r sale to manufacturers of personal skin care products. The adsorbent polymers are used to deliver high-value actives in skin-care products. Microsponge and Poly-Pore are the principal trade names under which these products are sold. Its basic minerals product line supplies minerals to a variety of markets and industrial applications, including drilling fluid additives, ferro alloys and other industrial.

The Company’s pet products include sodium bentonite-based scoopable (clumping), traditional and alternative cat litters, as well as specialty pet products sold to grocery and drug stores, mass merchandisers, wholesale clubs and pet specialty stores throughout the United States. It is primarily a private-label producer of cat litter, and its products are marketed under various trade names. These products are sold solely in the United States from three principal sites from which it package and distribute finished goods. Its transportation segment provides logist ics services and is a component of its capability in supplyi! ng custom! ers on a national basis.

Construction Technologies Segment

The Company’s construction technologies segment serves customers engaged in a range of construction projects, including site remediation, concrete waterproofing for underground structures, liquid containment on projects ranging from landfills to flood control, and drilling applications including foundation, slurry wall, tunneling, water well and horizontal drilling. Its construction technologies segment conducts its business through wholly owned subsidiaries and joint ventures throughout the world. This segment consists of four product lines: building materials; contracting services; drilling products, and lining technologies.

The Company sells lining and other products for a variety of applications, most of which are directed to preserving or remediating environmental issues. It helps customers protect ground water and soil through the sale of geosynthetic clay liner products containing bentonite. It market these products under the BENTOMAT and CLAYMAX trade names principally for lining and capping landfills, mine waste disposal sites, water and wastewater lagoons, secondary containments in tank farms, and other contaminated sites. It also provides associated geosynthetic materials for these applications, including geotextiles and drainage geocomposites.

The Company’s lining technologies product line also includes specialized technologies to mitigate vapor intrusion in new building construction. It also provides reactive capping technologies and solutions to contain residual contamination, reduce costs associated with ex-situ remedies, and aid in environmental protection. Products offered include Liquid Boot, a liquid applied vapor barrier system; REACTIVE CORE-MAT, an in-situ sediment capping material; ORGANOCLAY, which absorbs organic containments, and QUIK-SOLID, a super absorbent media.

The Company offer a variety of active and passive waterproofing and greenroof technolog! ies for u! se in protecting the building envelope of non-residential constructions, including buildings, subways, and parkway systems. Its products include VOLTEX, a waterproofing composite comprised of two polypropylene geotextiles filled with sodium bentonite; ULTRASEAL, an advanced membrane using a active polymer core, and COREFLEX, featuring heat-welded seams for protection of critical infrastructure. In addition to these membrane materials, it also provides roofing products and a variety of sealants and other accessories required to create a functional waterproofing system.

The Company drilling products are used in environmental and geotechnical drilling applications, horizontal directional drilling, mineral exploration and foundation construction. The products are used to install monitoring wells, facilitate horizontal and water well drilling, and seal abandoned exploration drill holes. VOLCLAY GROUT, HYDRAUL-EZ, BENTOGROUT and VOLCLAY TABLETS are among the trade nam es for products used in these applications. It also offer a range of drilling products used in the excavation of foundations for large buildings, bridges and dams; these products include SHORE PAC and PREMIUM GEL. Contracting services, which involve installation of products, are occasionally offered to customers for select projects.

Energy Services Segment

The Company’s energy services segment provides services to improve the production, costs, compliance, and environmental impact of activities performed in the oil and gas industry. Operating as CETCO Energy Services, it offer a range of patented technologies, products and services for all phases of oil and gas production, transportation, refining, and storage throughout the world. It provide both land-based and offshore water treatment, well testing, pipeline separation, nitrogen, coil tubing and other services to the oil and gas industry. The Company provides its services through subsidiaries lo cated in Australia, Brazil, Malaysia, Nigeria, the United Ki! ngdom, an! d the United States, principally in the Gulf of Mexico and the surrounding on-shore area. Its principal services include water treatment, coil tubing, well testing, nitrogen services and pipeline. The Company helps customers comply with regulatory requirements by providing equipment, technologies, personnel and filtration media to treat waste water generated during oil production.

The Company’s coil tubing services utilize metal piping, which comes spooled on a large reel. It provide both equipment and operating personnel to perform services ranging from acid stimulation, reverse circulation, cementing, pressure control, nitrogen injection, and other operations that involve pumping fluids into a well. Horizontal wells and shale completions are a large component of its operations. It provide equipment and personnel to help customers control well production, as well as to clean up, unload, separate, measure component flow, and dispose of fluids from oil and gas w ells. Nitrogen services are provided in jetting wells that are loaded with fluid; stimulating wells, including fracturizing and acidizing; displacing completion fluids prior to perforating; inflating flotation devices for offshore installations, and pressure testing and other maintenance activities.

Transportation Segment

The Company operates a long-haul trucking business through Ameri-Co Carriers, Inc., and a freight brokerage business through Ameri-Co Logistics, Inc. primarily for delivery of finished products throughout the continental United States. These services are provided to its subsidiaries, as well as third-party customers.

Advisors’ Opinion:

  • [By Jake L’Ecuyer]

    Leading and Lagging Sectors
    In trading on Friday, Basic Materials shares were relative leaders, up on the day by 0.78 percent. Top gainer in the sector was AMCOL International (NYSE: ACO), up 9 percent.

  • [By Seth Jayson]

    AMCOL International (NYSE: ACO  ) is expected to report Q2 earnings on July 26. Here’s what Wall Street wants to see:

    The 10-second takeaway
    Comparing the upcoming quarter to the prior-year quarter, average analyst estimates predict AMCOL International’s revenues will grow 1.6% and EPS will wither -16.9%.